Fume Extractor Filters for Soldering Fume Extractor , Air Purifier
Filters for Industrial Fume Extractor
Specifications:
Name | G06-0020 |
Pre-Filter | for filtering big particles of over 50microns in the fume |
Middle filter | For filtering dust particles; for particles above 0.3microns, its
filtering efficiency reaches 99.97%. |
Main filter | for filtering dust particles; for particles above 0.3microns, it
filtering efficiency reaches 99.97%, for filtering hazardous gases,
its filtering efficiency reaches above 95% |
Description:
Mutiple air filters for fume extractor model F6001, F6001D, F6002,
F6002D.
Features:
High-efficient Waterun Four-stage absorbing technology
1. First stage: preliminary- effect filtering layer, it can
efficiently filter over 80 harmful matters large-size duts, smogs
and animal hairs.
2. Second stage: high-efficient filtering layer, it can filter
above 0.3micron granules and ducts.
3. Third stage: activated-carbon filtering layer, it can absorb
harmful gas like radon gas and toluene.
4. Fourth stage: high-efficient filtering layer. It can prevent the
secondary pollution of activated carbon powder.
FQAs:
1. What’s the functions for the filters?
Answers.
1) The Pre-Filter/F8 pre-filter filters large particles of dust,
suspended particulates...
2) PP Middle Filter/Fiber glass filter: it filters more than 70
kinds of micro pollutants.
3) Main Filter/Active carbon: it effectively filters the common
toxic and hazardous gases.
4) High efficiency filter(combine middle filter and active carbon
filter): Double HEPA filtering guarantees the perfect air
cleanliness.
2. What’s the life span of our fume extractor?
Answer: Our Brushless Motor can be continuous working 20,000 hours,
consider environmental factors. Usually it can use 4-5 years
without any problems.
3. The ducts for the fume extractor can be shortened or lengthened?
Answer: Ducts can be bent or lengthened as desired; but we suggest
not more than 1.5meter. For multi-station, the total pipe length
should not more than 10 meters.
4. What’s the best distance between the nozzle and the smokes?
Answer: The distance to be 5-15cm is the best.
5. What’s the life span for the pre-filter, middle filter and the
main filter?
Answer: Normally, we suggest the replacement periods for pre-filter
is 1month, middle filter 3 months, and the main filter 6 months.
However, it depends on the different environment.
6. Bent pipe will affect smoke purify?
Answer: Yes, it affect the suction power, it is better to reduce
the bent rate.
7. Can our fume extractor completely filtered poison gas?
Answer: No, there still no any kind of filter can filter out 100%
of hazardous gases, but you can make a different filter net rate
upon request.
8. Does your fume extractor can purify the particles for clean
room?
- Sure, the efficiency is very obviously.
9. Can we use the fume extractor on high temperature environment?
- Better no more than 60 degrees. It is to avoid the risk of fire.
